CNC vertical lathe FAQ
2016-02-18
Cnc Vertical Lathe is a kind of efficient automatic machine tools. It combines computer technology, automation technology, servo drive, precision measurement and precision machinery and other fields of new technological achievements. Because of its good economic performance,high production efficiency plays an increasingly important position. In order to improve the utilization rate of machine tools and increase the effective of the system, wokers should be familiar with various device failures .If there is device failures when using the Vertical Lathe Machine, please refer to the following settlement method.
Vertical Lathe Machine FAQ
1. Problem: Ram off the tool when turning have the striae.
Failure Cause :Low pressure of balance cylinder, nut big clearance, pressure plate and oblique iron clearance is big.
Solution: Reasonable adjustment pressure, nut clearance, clearance of retighten clamp and oblique iron.
2 Problem: Beam don't lifting.
Failure Cause :Pressure is not enough, air switch trip.
Solution: Adjust pressure,put air switch.
3 Problem: Can't change tap position.
Failure Cause : Low oil pressure, lock lever is not regular.
Solution: Adjust the pressure, adjust the lock lever position.